E-PROJECTTOPICS

Mechanical Engineering

Discover and download richly documented academic research across all disciplines – all at your fingertips.

THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER

ABSTRACT Mechanical engineering department of the named institute has many non operational machines sequel to this fact maintenance which resulted to non development and non maintenance of the institute community at large. By this fact the project (mechanical lawn mower) was constructed and desig...

Mechanical Engineering Type: PROJECT

📄 58 pages | 🧠 6702 words | 📚 5 chapters

407 views

View Full Project

THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE

ABSTRACT Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints im...

Mechanical Engineering Type: PROJECT

📄 53 pages | 🧠 5262 words | 📚 8 chapters

364 views

View Full Project

DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

ABSTRACTThe design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle  which  is attached to the shaft. A helical spring that is incorporated to ...

Mechanical Engineering Type: PROJECT

📄 43 pages | 🧠 4535 words | 📚 5 chapters

399 views

View Full Project

DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF

ABSTRACTThe purpose of this project which is the design and fabrication of lockable metal shelf is to keep the files, text books, documents etc. in a safe place for future we by the institution and also it will render a maximum service to any office where it will be kept. The primary and second a...

Mechanical Engineering Type: PROJECT

📄 40 pages | 🧠 3820 words | 📚 5 chapters

311 views

View Full Project

REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

ABSTRACT This project is concerned write the identification of those defects that are found in most of the drawing tables in the Mechanical Engineering drawing studio. The report investigates the possible ways through which the mentioned above can be brought back to normal standard for usage ins ...

Mechanical Engineering Type: PROJECT

📄 37 pages | 🧠 4398 words | 📚 8 chapters

523 views

View Full Project

REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER

ABSTRACTThe rehabilitation and repair of a faulty air conditioner was the project undertaken by the group of student listed above in the mechanical Engineering department.Before embarking on the project, the following fault were detect and rectified, such as(a) Blockage of the condenser by impuri...

Mechanical Engineering Type: PROJECT

📄 41 pages | 🧠 4597 words | 📚 3 chapters

347 views

View Full Project

FABRICATION OF A FOLDABLE CAMP BED

ABSTRACTIn this project, three alternative design solutions were considered for the foldable cam â€" bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discuss...

Mechanical Engineering Type: PROJECT

📄 41 pages | 🧠 3935 words | 📚 10 chapters

407 views

View Full Project

REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT

ABSTRACT This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning.  This report therefore contains the different stages embarked in the execution of the project.  These include the literature back ground, checkingâ€™s ...

Mechanical Engineering Type: PROJECT

📄 36 pages | 🧠 4193 words | 📚 5 chapters

396 views

View Full Project

CONSTRUCTION OF TWO FACE GAS BURNER

ABSTRACT This project which is on the design and fabrication of a two face gas burner is a brief exploration on the various ways and means of designing, construction, operating the two face gas burner, putting cost into consideration for economic advantage.  Herein are brief information and ...

Mechanical Engineering Type: PROJECT

📄 38 pages | 🧠 3480 words | 📚 7 chapters

354 views

View Full Project

REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE'S OFFICE

ABSTRACT This project is basically on the repair of a damaged air conditioner.  It is intended to provide a break through in the restoration of any damaged air conditioner and thereby curtail the huge expenses incurred in the replacement of the entire unit. This report covers an introduction...

Mechanical Engineering Type: PROJECT

📄 39 pages | 🧠 4712 words | 📚 5 chapters

808 views

View Full Project

REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER

ABSTRACTThe need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable.  The fact that many people use the air conditioner to cool the temperature in their respective home and offices make its maintenance a top priority to e...

Mechanical Engineering Type: PROJECT

📄 39 pages | 🧠 4567 words | 📚 4 chapters

419 views

View Full Project

DESIGN AND FABRICATION OF A MOBILE DEEP FREEZER

ABSTRACTThis write up is a defeat of the process and formulation of plans for the physical realization of the construction of a mobile deep freezer. It is divided in chapters which discussed extensively on the practical refrigeration system with full attention given design factors, working princi...

Mechanical Engineering Type: PROJECT

📄 108 pages | 🧠 13591 words | 📚 6 chapters

367 views

View Full Project

DESIGN AND CONSTRUCTION OF BAKING OVEN

ABSTRACT This project is aimed at producing an oven a purposeful baking oven with temperature regulator, which is economical and very convenient to use. The equipment was designed taking into consideration the case of its production, maintenance and services.The production design which inclu...

Mechanical Engineering Type: PROJECT

📄 67 pages | 🧠 8073 words | 📚 6 chapters

404 views

View Full Project

THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE

ABSTRACTThe fabrication of this candle moulding machine was based on creative activity, which entailed integrated knowledge and application of material science, strength of material, property of material and elements of design.  However, this project offered us the opportunity to use a great...

Mechanical Engineering Type: PROJECT

📄 36 pages | 🧠 3963 words | 📚 7 chapters

345 views

View Full Project

REPAIR OF A DAMAGED REFRIGERATOR

ABSTRACTMechanical Engineering Department of the named institute has many has non operational machines sequel to the fact, maintenance was poorly executed which resulted to the breakdown of this refrigerator. Quality and effectiveness of machine maintenance were well observed.  Also, a minim...

Mechanical Engineering Type: PROJECT

📄 57 pages | 🧠 6596 words | 📚 5 chapters

404 views

View Full Project

« 1 2 3 4 »