LIQUID FUEL BURNING SYSTEM FOR CERAMIC FIRING

Name: e-Project Topics Centre
Address: 6, Dr. Dudu's Street, off Emiko close, Warri, Delta, DL, 331103, NG
Telephone: 09019904113

📝

Presented To

Environmental Design Department

📄 Pages: 95 🧠 Words: 6970 📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 492

⬇️ Download (Complete Report) Now!

ABSTRACT
This study is concerned with designing calibrating and operating a liquid fuel system for firing ceramic work as an alternative to traditional firing methods such as gas and wood firing, A coil burner was chosen and re-designed to eliminate prime movers such as fans, pumps and blowers. Kerosene, the fuel, was delivered by gravity feed, with a little water added to assist automization. Temperature of 1280Â�C and above, which are required for glazing ceramic works were achieved. The result was a more rugged fuel firing system without prime movers, a system which can be operated even in rural settings where ceramic activities need to be encouraged.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.

To access the full material click the download button below

OR

Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!