CONSTRUCTION OF A HYDROCYCLONE

ABSTRACT

The hydrocyclone is a separating device used for the separation of dust
particles from air, which has no moving component parts. This mechanism can
also be defined as a system of winds circulating about a center of
relatively low barometric pressure and on the earths surface, blowing
inward in spiral form.

This project is constructed for the separation of liquid - liquid and solid
- liquid mixture, like air and dust mixture, dust and liquid drop. This
equipment is constructed to separate dust air mixture input of about 25m 3/h.

The equipment was constructed with flat sheet metal plate of a desired
standard. The dimensioned and for truncated parts were coupled and welded
in other to fasten the parts together. The material used in this
construction is mild sheet. This material was selected to avoid the effect
of rust of material due to contact of the separating item or material with
the walls of metal sheet.

In considering the rating of this instrument, it is capable of sparing a
gas-dust mixture of about 70% pure compared to the one used in commercial
industries. That has the offering of product at around 90% pure. The total
material cost of this equipment is ten thousand naira (

N

10,000).

The effect of hydrocyclone had been of much help especially in the
pharmaceutical and photographic industries in the process of particle size
separation. It is use to separate a mixture of particle size within the
range of 4 and 95 m. The moving or relative speed for this model during
separation is 4mls. 

TABLE OF CONTENT

TITLE PAGE

LETTER OF TRANSMITTAL

APPROVAL PAGE

DEDICATION

ACKNOWLEDGEMENT

ABSTRACT

TABLE OF CONTENT

CHAPTER ONE

INTRODUCTION

OBJECTIVE OF THE PROJECT

CHAPTER TWO

LITERATURE REVIEW

HISTORICAL REVIEW OF PARTICLE SIZE SEPARATION

THEORY OF PARTICLE SIZE SEPARATION

MATERIAL BALANCE FOR SCREENING

THEORY OF OPERATION

USES OF HYDROCYCLONE

TYPES OF MECHANICAL SIZE SEPARATION EQUIPMENT

FEATURES OF THE HYDROCYCLONE

COLLECTION EFFICIENCY OF A TYPICAL HYDROCYCLONE

COSTING ESTIMATION

DISADVANTAGES OF HYDROCYCLONE

MATERIAL OF CONSTRUCTION

CHAPTER THREE

CONSTRUCTION OF A HYDROCYCLONE

CHAPTER FOUR

DISCUSSION

RECOMMENDATION

CONCLUSION

REFERENCES

TABLE FOR NOMENCLATURE

APPENDIX