CONSTRUCTION OF PORTABLE WHEEL-BARROW

After detailed study on machines and levers, the construction work started
as follows:-

Making out, pattern development, cutting filling, drilling, machining,
assembling, welding and finishing. Detailed procedures carried out is
located at the sequence of operation in subsequent pages.

The machine has scale of 1:5 in all parts of its dimensions. However, brief
dimensions are given below:-

Upper surface of bowl - 850mm

Inner surface of bowl - 335mm

Stand height - 325mm

Diameter of wheel - 250mm

Diameter of shaft seating and the shaft 4mm

Thickness of type - 75mm

The drawing of the project was done and enclosed at the end page of this
booklet. At last, a 150kg capacity of conveying machine was constructed.

TABLE OF CONTENTS

Title pages

Title page

Approval page

Dedication page

Acknowledgment page

Abstract

CHAPTER ONE

Introduction

Historical background

1.2 Need for constructing the machine

CHAPTER TWO

THEORY/LITERATURE SURVEY

2.1 Types of load to be carried by the conveyor

2.2 Operation of the wheel-barrow

CHAPTER THREE

3.1 Equipments/tools employed during construction of the wheel-barrow

3.2 Materials of construction

3.3 Construction procedure

3.4 Sequence of operation

3.5 Design calculations

3.6 Calculations basic on the bowl

3.7 Specifications

3.8 Project drawing

CHAPTER FOUR

COSTING OF PORTABLE WHEEL-BARROW

4.1 Material cost analysis

4.2 Labour cost analysis

4.3 Miscellaneous costs

Total cost

CHAPTER FIVE

5.1 Discussion

5.2 Precautions taken during construction

5.3 Cautions to users

5.4 Recommendations

5.5 Conclusions

References