Site Logo E-PROJECTTOPICS

THE DESIGN AND CONSTRUCTION OF CAR CONTROLLER USING TELEMETRY SYSTEM


By


ANI SAMUEL EE/H2003/041



Presented To


Electrical/Electronic Engineering Department

📄 Pages: 22       🧠 Words: 2016       📚 Chapters: 3 🗂ïļïļ For: SEMINAR

👁ïļâ€ðŸ—Ļïļïļïļ Views: 271      

⮇ïļ Download (Complete Report) Now!


INTRODUCTION
The vehicle system control using telemetry application is all about using a radio wave to control and activate certain events such as the car horn, car head light, car ignition (starter) and car air conditioner etc.
This is achieved by using various tone frequencies by using an encoder via a radio frequency transmitter (low power) that provides the carrier frequency for these tones.
At the receiver end demultiplexing and decoding of these tone takes place via a detector/receiver stage. The output of the encoder is used to turn on a relay switch, which inturn connects power source to either the car engine, horn or lamp etc.
The application of thus project include space exploration, where lunar vehicles are controlled from earth station by using satellite as the medium of transfer of signals.
In the military warfare, unmanned air crafts, missiles and even armoured tanks are controlled these days by using the pinaple of telemetry applications. Other areas include GSM, where a subscriber has the total control of his telephone calls conversation through the BTS (Base Transmission or Transceiver Station). Its application are so vast and large that they are too numerous to mention.

TRANSMITTER
Transmitter is a device that process and possibly encode information, so as to make it suitable for transmission and subsequent reception. In a transmitter the information modulates the carrier. It superimposed an a light frequency since wave modulation varies from one system to another and may be high or low levels. Modulations is of three types amplitude modulation, frequency modulation and pulse modulation or combination of these.

FREQUENCY MODULATION:
Frequency modulation is a system in which the amplitude of the modulated carrier is constant while its frequency and rate of change are varied by the modulating signal. Frequency modulation is much more immune to noise than amplitude modulation noise vector is superimposed on the carrier.

RADIO WAVE
This is simply passing information via electromagnetic wave. Radio communicating use electromagnetic waves to carry information over long distances. These radio waves usually propagate through the earthâ₮s atmosphere to places where they induces EMFs in the antennas of a distant receiver. The main modes of propagation are grand wave propagation sky wave propagation and space wave propagation.

📄 Pages: 22       🧠 Words: 2016       📚 Chapters: 3 🗂ïļïļ For: SEMINAR

👁ïļâ€ðŸ—Ļïļïļïļ Views: 271      

⮇ïļ Download (Complete Report) Now!

🔗 Related Topics

THE DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH AN AUTOMATIC SWITCH OVER BATTERY CHARGER DESIGN AND CONSTRUCTION OF A 3 WAY INTER-COMMUNICATION SYSTEM Wireless Power Transfer system : Development and Implementation Wireless-based Text Entry System for Handicap AN INTELLIGENT LEAD ACID BATTERY MANAGEMENT SYSTEM FOR SOLAR AND OFF-PEAK ENERGY STORAGE THE DESIGN OF A 500 WATTS UNINTERRUPTIBLE POWER SUPPLY WITH VOLTAGE LOW INDICATOR [INVERTER] DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM CONSTRUCTION OF AUTOMATIC CHANGE OVER SWITCH DESIGN AND CONSTRUCTION OF 25AMPS SINGLE PHASE AUTOMATIC CHANGE OVER CONSTRUCTION OF AN INTRUDER ALARM SYSTEM DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER THE DESIGN AND CONSTRUCTION OF AN UNINTERRUPTED POWER SYSTEM (UPS) Disease Detection using Sensors with Raspberry Pi through Wireless Sensor Network in vegetable farms DESIGN AND CONSTRUCTION OF 2KW SOLAR PANEL INVERTER DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM CONSTRUCTION OF 200W UNINTERRUPTIBLE POWER SUPPLY DESIGN AND IMPLEMENTATION OF BURGLAR ALARM SYSTEM DESIGN AND CONSTRUCTION OF 45W AUDIO POWER AMPLIFIER DESIGN AND CONSTRUCTION OF 45W AUDIO POWER AMPLIFIER

click on whatsapp